Applio

A simple, high-quality voice conversion tool focused on ease of use and performance.

Support — Discord Bot — GitHub

Voice Model

Select the voice model to use for the conversion.

Index File

Select the index file to use for the conversion.

Upload Audio

Select Audio

Select the audio to convert.

Output Path

The path where the output audio will be saved, by default in assets/audios/output.wav

Export Format

Select the format to export the audio.

WAV MP3 FLAC OGG M4A

Speaker ID

Select the speaker ID to use for the conversion.

Split the audio into chunks for inference to obtain better results in some cases.

Split Audio

Apply a soft autotune to your inferences, recommended for singing conversions.

Autotune

Autotune Strength

Set the autotune strength - the more you increase it the more it will snap to the chromatic grid.

0 1

Clean your audio output using noise detection algorithms, recommended for speaking audios.

Clean Audio

Clean Strength

Set the clean-up level to the audio you want, the more you increase it the more it will clean up, but it is possible that the audio will be more compressed.

0 1

Enable formant shifting. Used for male to female and vice-versa convertions.

Formant Shifting

Post-process the audio to apply effects to the output.

Post-Process

Browse presets for formanting

Presets are located in /assets/formant_shift folder

Quefrency for formant shifting

Default value is 1.0

0 16

Timbre for formant shifting

Default value is 1.0

0 16

Apply reverb to the audio.

Reverb

Reverb Room Size

Set the room size of the reverb.

0 1

Reverb Damping

Set the damping of the reverb.

0 1

Reverb Wet Gain

Set the wet gain of the reverb.

0 1

Reverb Dry Gain

Set the dry gain of the reverb.

0 1

Reverb Width

Set the width of the reverb.

0 1

Reverb Freeze Mode

Set the freeze mode of the reverb.

0 1

Apply pitch shift to the audio.

Pitch Shift

Pitch Shift Semitones

Set the pitch shift semitones.

-12 12

Apply limiter to the audio.

Limiter

Limiter Threshold dB

Set the limiter threshold dB.

-60 0

Limiter Release Time

Set the limiter release time.

0.01 1

Apply gain to the audio.

Gain

Gain dB

Set the gain dB.

-60 60

Apply distortion to the audio.

Distortion

Distortion Gain

Set the distortion gain.

-60 60

Apply chorus to the audio.

chorus

Chorus Rate Hz

Set the chorus rate Hz.

0 100

chorus Depth

Set the chorus depth.

0 1

chorus Center Delay ms

Set the chorus center delay ms.

7 8

chorus Feedback

Set the chorus feedback.

0 1

Chorus Mix

Set the chorus mix.

0 1

Apply bitcrush to the audio.

Bitcrush

Bitcrush Bit Depth

Set the bitcrush bit depth.

1 32

Apply clipping to the audio.

Clipping

Clipping Threshold

Set the clipping threshold.

-60 0

Apply compressor to the audio.

Compressor

Compressor Threshold dB

Set the compressor threshold dB.

-60 0

Compressor Ratio

Set the compressor ratio.

1 20

Compressor Attack ms

Set the compressor attack ms.

0 100

Compressor Release ms

Set the compressor release ms.

0.01 100

Apply delay to the audio.

Delay

Delay Seconds

Set the delay seconds.

0 5

Delay Feedback

Set the delay feedback.

0 1

Delay Mix

Set the delay mix.

0 1

Select Custom Preset

Select file to import

Preset Name

Pitch

Set the pitch of the audio, the higher the value, the higher the pitch.

-24 24

Filter Radius

If the number is greater than or equal to three, employing median filtering on the collected tone results has the potential to decrease respiration.

0 7

Search Feature Ratio

Influence exerted by the index file; a higher value corresponds to greater influence. However, opting for lower values can help mitigate artifacts present in the audio.

0 1

Volume Envelope

Substitute or blend with the volume envelope of the output. The closer the ratio is to 1, the more the output envelope is employed.

0 1

Protect Voiceless Consonants

Safeguard distinct consonants and breathing sounds to prevent electro-acoustic tearing and other artifacts. Pulling the parameter to its maximum value of 0.5 offers comprehensive protection. However, reducing this value might decrease the extent of protection while potentially mitigating the indexing effect.

0 0.5

Hop Length

Denotes the duration it takes for the system to transition to a significant pitch change. Smaller hop lengths require more time for inference but tend to yield higher pitch accuracy.

1 512

Pitch extraction algorithm

Pitch extraction algorithm to use for the audio conversion. The default algorithm is rmvpe, which is recommended for most cases.

crepe crepe-tiny rmvpe fcpe hybrid[rmvpe+fcpe]

Embedder Model

Model used for learning speaker embedding.

contentvec chinese-hubert-base japanese-hubert-base korean-hubert-base custom

Select Custom Embedder

Folder Name

Upload .bin

Upload .json

The f0 curve represents the variations in the base frequency of a voice over time, showing how pitch rises and falls.

Output Information

The output information will be displayed here.

Export Audio

Voice Model

Select the voice model to use for the conversion.

Index File

Select the index file to use for the conversion.

Applio is a Speech-to-Speech conversion software, utilizing EdgeTTS as middleware for running the Text-to-Speech (TTS) component. Read more about it here!

TTS Voices

Select the TTS voice to use for the conversion.

TTS Speed

Increase or decrease TTS speed.

-100 100

Text to Synthesize

Enter the text to synthesize.

Upload a .txt file

Input path for text file

Output Path for TTS Audio

Output Path for RVC Audio

Export Format

Select the format to export the audio.

WAV MP3 FLAC OGG M4A

Speaker ID

Select the speaker ID to use for the conversion.

Split the audio into chunks for inference to obtain better results in some cases.

Split Audio

Apply a soft autotune to your inferences, recommended for singing conversions.

Autotune

Autotune Strength

Set the autotune strength - the more you increase it the more it will snap to the chromatic grid.

0 1

Clean your audio output using noise detection algorithms, recommended for speaking audios.

Clean Audio

Clean Strength

Set the clean-up level to the audio you want, the more you increase it the more it will clean up, but it is possible that the audio will be more compressed.

0 1

Pitch

Set the pitch of the audio, the higher the value, the higher the pitch.

-24 24

Filter Radius

If the number is greater than or equal to three, employing median filtering on the collected tone results has the potential to decrease respiration.

0 7

Search Feature Ratio

Influence exerted by the index file; a higher value corresponds to greater influence. However, opting for lower values can help mitigate artifacts present in the audio.

0 1

Volume Envelope

Substitute or blend with the volume envelope of the output. The closer the ratio is to 1, the more the output envelope is employed.

0 1

Protect Voiceless Consonants

Safeguard distinct consonants and breathing sounds to prevent electro-acoustic tearing and other artifacts. Pulling the parameter to its maximum value of 0.5 offers comprehensive protection. However, reducing this value might decrease the extent of protection while potentially mitigating the indexing effect.

0 0.5

Hop Length

Denotes the duration it takes for the system to transition to a significant pitch change. Smaller hop lengths require more time for inference but tend to yield higher pitch accuracy.

1 512

Pitch extraction algorithm

Pitch extraction algorithm to use for the audio conversion. The default algorithm is rmvpe, which is recommended for most cases.

crepe crepe-tiny rmvpe fcpe hybrid[rmvpe+fcpe]

Embedder Model

Model used for learning speaker embedding.

contentvec chinese-hubert-base japanese-hubert-base korean-hubert-base custom

Select Custom Embedder

Folder Name

Upload .bin

Upload .json

The f0 curve represents the variations in the base frequency of a voice over time, showing how pitch rises and falls.

Output Information

The output information will be displayed here.

Export Audio

Download Model

Model Link

Output Information

The output information will be displayed here.

Drop files

Drag your .pth file and .index file into this space. Drag one and then the other.

·

Built with Gradio logo

·